Metallic epoxy flooring in La Presa CA - a marbled floor built on a sound slab
Tired of a plain gray slab or an old coating that peeled? We prep the concrete first, then lay a metallic floor made for indoors.
Will a metallic epoxy floor work on my concrete?
Metallic epoxy flooring is a poured resin floor with metallic pigment that moves as it's laid, so plain concrete ends up with a deep, swirled look like polished stone or moving water. We put it down on indoor slabs in La Presa and in the cities around it across San Diego County, and the schedule mostly comes down to the prep your slab needs and the wait between coats.
Most people who call me about metallic floors have a garage, basement or room with bare or stained concrete, or a coating that already let go and needs stripping off, and they want something that finally looks finished. Before we talk colors, I want to know what's been on that slab, like old glue, paint, oil or a damp spot along the wall. The price moves with the size of the floor, how much grinding and repair the concrete needs and how many colors you want blended, and the schedule turns on that same prep plus how long each coat sits before the next one goes on, so I look at all of it on site and give you a figure for your own floor.
How we install metallic epoxy flooring
I start by walking the slab with you and asking what happened to it before, because a metallic floor is only as good as the concrete under it. We grind the surface so the resin has something to grab, fill cracks and chips, and clear off anything that would stop the coating from bonding. Metallic floors are fussy to put down, which is part of why I enjoy them, so we lay a small sample first and keep an eye on the room's conditions on install day. The floor then goes down in layers: a primer that soaks into the concrete, a colored base coat, the metallic coat where the pattern happens, and a clear top layer that helps with scratches. These are indoor floors, so if your slab is outside we'll talk through a different plan.
Metallic isn't the right answer for every room, and I'd rather say so up front. If the floor takes heat, hot water or heavy daily abuse, urethane cement flooring usually handles that better, and if you'd like the concrete itself to be the finish with nothing on top, polished concrete flooring is the better fit.
A single metallic color
This suits a living room, office or showroom where you want depth and movement without a busy pattern. One color is also easier to judge from the sample, so there are fewer surprises when the full floor goes down.
Two or three blended colors
This suits a garage, game room or bar area where the floor is meant to be the thing people notice. Blending takes more hands on install day, and the look changes more from one part of the room to the next.
A darker or lighter base
A dark base gives the metallic a richer, deeper swirl, while a lighter base reads brighter and hides dust better in a busy space. We try your pick on the sample so you see it on your own concrete first.
Metallic epoxy flooring permits and licenses around La Presa
Whether a metallic floor needs a permit isn't something I guess at, because it depends on the work and the address, and some properties here fall under a city while others fall under the County. For the unincorporated areas, San Diego County's building office issues building permits for homes and commercial buildings, and it says certain structures can be exempt if they meet requirements like size and location, and asks owners who aren't sure to contact it. We check with whichever office covers your property before work starts and tell you what they said. The slabs we meet are much the same on garage jobs in Spring Valley as on house jobs in Casa de Oro-Mount Helix, and the ones that take the most planning have old glue, a damp patch or a coating that already peeled.
In California, a synthetic products license covers resin and epoxy work, and a flooring license covers preparing the surface and installing the floor, so those are the licenses that line up with this job. The state's minor work exemption, which lets someone without a license take on very small jobs, went up from $500 to $1,000, and it only applies when the work needs no permit and that person has no one working for them.
Metallic epoxy floors up close
Why call us for metallic epoxy
I come out and do the work
I'm the one who comes to look at your floor, and I'm on that floor with our crew when it goes down. The person who asked about your slab's history is the same one watching the sample and the room on install day.
Tricky slabs are what we're known for
We're best known for floors with old glue, damp spots or a coating that already peeled. That matters here, because whatever is left under a metallic floor is usually what makes it fail.
Licensed and fully insured on every job
We're licensed and fully insured. You aren't the one carrying the risk if something goes wrong while our crew is working in your house.
Based in La Presa since 2023
I started this business here in 2023 after years of working concrete floors alongside my dad. We take jobs across the cities around La Presa, so you're dealing with someone close by.
The part that matters most is the concrete you'll never see once the floor is down, so I'd rather look at your slab before we pick colors. Your satisfaction, guaranteed. Set up a visit and I'll come take a look.
(619) 609-0422Get a metallic floor estimate for your slab
We respond within 1 business day, and I'll set a time to come out and look at your concrete, free and with no obligation. If you can, tell us whether the slab sits at ground level and where any old oil stains are, so I know what to look for when I get there.
Metallic epoxy questions from La Presa homeowners
Can metallic epoxy go on an outdoor patio in La Presa?
No, metallic epoxy is an indoor floor. One coatings maker says epoxies and urethanes aren't recommended on outdoor concrete because of moisture, sunlight, weathering and freeze-thaw. For a patio or pool area we'd look at a pool deck coating built for outside instead.
Why does slab moisture matter for a metallic epoxy floor?
Moisture coming up through the concrete can work against the coating from underneath. One maker requires a suitable moisture barrier under slabs poured at ground level, because without one, seasonal ground moisture can push vapor through the slab no matter what earlier tests showed. That's why I ask whether your slab sits on the ground and whether anyone knows if a barrier went in.
Do I need a topcoat over metallic epoxy flooring?
Yes, plan on one. One installation guide highly recommends a urethane topcoat over the metallic coating to help prevent scratching, and the clear finish in a typical system is made for high traffic. When you compare quotes, check that each one includes a urethane topcoat over the metallic layer.
How much does metallic epoxy flooring cost in La Presa?
It's priced off your floor, mainly its size and how much work the concrete needs before we coat it. Grinding off an old coating, working around oil stains or dealing with moisture all add to the job, and blending several colors takes longer than one. I give you a number once I've seen the slab in person.
What causes a metallic epoxy floor to peel or lift?
Most peeling starts in the concrete, not the coating. One installation guide says oil that has soaked into concrete usually can't be fully removed and may keep the coating from bonding, and moisture from below causes trouble too. Point out old oil spots when I come out so we can plan around them.
How do I choose an installer for metallic epoxy flooring?
Ask how they handle the conditions on install day, because that's where these floors go right or wrong. One maker calls metallic systems extremely difficult to install, with several variables outside the installer's control, and strongly recommends small trial areas to check the look and performance first. Ask whether they'll lay a sample on your slab before the full floor.
Plan your metallic floor and the slab under it
Call (619) 609-0422 any day from 8 AM to 9 PM, or send the form, and tell us what's on your slab now.
